You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
103 lines
2.4 KiB
Markdown
103 lines
2.4 KiB
Markdown
3 days ago
|
# ESP32 Temperature Monitoring and Web Application Project
|
||
|
|
|
||
|
|
This project consists of two main parts: an ESP32 device sending temperature data using MQTT and a Flask-based web application that displays this data.
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
## Part 1: ESP32 Temperature Monitoring
|
||
|
|
|
||
|
|
### Requirements
|
||
|
|
|
||
|
|
- ESP32 Development Board
|
||
|
|
- DS18B20 Temperature Sensor
|
||
|
|
- Arduino IDE with ESP32 support
|
||
|
|
- Wi-Fi connection
|
||
|
|
|
||
|
|
### Configuration and Setup
|
||
|
|
|
||
|
|
1. **Install the Arduino IDE**:
|
||
|
|
Download and install from [Arduino website](https://www.arduino.cc/en/software).
|
||
|
|
|
||
|
|
2. **Add ESP32 Support in Arduino IDE**:
|
||
|
|
Follow the instructions [here](https://randomnerdtutorials.com/installing-the-esp32-board-in-arduino-ide-windows-instructions/).
|
||
|
|
|
||
|
|
3. **Install Required Libraries**:
|
||
|
|
In Arduino IDE, go to `Sketch` > `Include Library` > `Manage Libraries...` and install:
|
||
|
|
- `WiFi`
|
||
|
|
- `PubSubClient`
|
||
|
|
- `ArduinoJson`
|
||
|
|
- `OneWire`
|
||
|
|
- `DallasTemperature`
|
||
|
|
|
||
|
|
4. **Configure Wi-Fi and MQTT Settings**:
|
||
|
|
Modify the provided ESP32 code in Arduino IDE with your Wi-Fi and MQTT details.
|
||
|
|
|
||
|
|
5. **Connect the DS18B20 Sensor to ESP32**:
|
||
|
|
- DS18B20 VCC to ESP32 3.3V
|
||
|
|
- DS18B20 GND to ESP32 GND
|
||
|
|
- DS18B20 Data to ESP32 GPIO 25
|
||
|
|
|
||
|
|
|
||
|
|
6. **Upload the Code**:
|
||
|
|
Connect ESP32 to your computer, select the correct board and port in Arduino IDE, and upload.
|
||
|
|
|
||
|
|
## Part 2: Flask Web Application
|
||
|
|
|
||
|
|
### Requirements
|
||
|
|
|
||
|
|
- Python 3.8 or later
|
||
|
|
- Virtual environment tool (e.g., `virtualenv`)
|
||
|
|
|
||
|
|
### Local Setup
|
||
|
|
|
||
|
|
1. **Clone the Repository**:
|
||
|
|
```
|
||
|
|
git clone [Repository URL]
|
||
|
|
cd [Repository Name]
|
||
|
|
```
|
||
|
|
|
||
|
|
2. **Create a Virtual Environment**:
|
||
|
|
```
|
||
|
|
python -m venv venv
|
||
|
|
source venv/bin/activate # Windows: venv\Scripts\activate
|
||
|
|
```
|
||
|
|
|
||
|
|
3. **Install Dependencies**:
|
||
|
|
```
|
||
|
|
pip install -r requirements.txt
|
||
|
|
```
|
||
|
|
|
||
|
|
4. **Configure MQTT Settings in `app.py`**:
|
||
|
|
Modify MQTT configuration in `app.py`.
|
||
|
|
|
||
|
|
5. **Run the Application**:
|
||
|
|
```
|
||
|
|
python app.py
|
||
|
|
```
|
||
|
|
Access at `http://localhost:8080`.
|
||
|
|
|
||
|
|
### Deploying to Fly.io
|
||
|
|
|
||
|
|
1. **Install Fly.io CLI**:
|
||
|
|
Follow instructions on [Fly.io documentation](https://fly.io/docs/getting-started/installing-flyctl/).
|
||
|
|
|
||
|
|
2. **Login to Fly.io**:
|
||
|
|
```
|
||
|
|
flyctl auth login
|
||
|
|
```
|
||
|
|
|
||
|
|
3. **Initialize Fly.io App**:
|
||
|
|
```
|
||
|
|
flyctl launch
|
||
|
|
```
|
||
|
|
|
||
|
|
4. **Deploy the App**:
|
||
|
|
```
|
||
|
|
flyctl deploy
|
||
|
|
```
|
||
|
|
|
||
|
|
5. **Verify Deployment**:
|
||
|
|
```
|
||
|
|
flyctl status
|
||
|
|
```
|